lt23-2

Starting at $14,900

MSRP on entry package, transportation and preparation fees may vary based on selection.

All LT23-2 models come equipped with a 23 HP Honda GX690 gas engine, dingo quick attach, 2,200 lb. operating weight, 850 lb. lift capacity, and operator platform.

  • Max Lift Height 5’9″ *not self leveling

    Max Pin Height 6′ 1″

    Max Dump Height 4′ 9″

    The Highest Point Discharge Discharge 1′ 3″

    Bucket Swing Angle 55°

    Bucket Unloading Angle 30°

    Angle of Departure 8°

    Total Height 3’11”

    Ground Clearance 3 1/2″

    Wheelbase 2′ 1″

    Machine Length *no bucket 5’9″

    Machine Width 43 1/4″

    Bucket Width 43 1/4″

    Total Length 7′ 3″

    Turning Radius 4′ 3″

    Engine Rated Power 21 HP/ 23 HP

    Engine Rotating Speed 3600 rpm

    Noise 95 Db

    Hydraulic Pressure 17 Mpa

    Cycle Time Raise 4.27 s Dump 1.34 s Lower 3.31 s

    Bucket Capacity 0.15 m3

    Max Lifting Power 1400 lbs

    Speed 0-5.5 km/h

    Machine Weight 2200 lbs

    Operating Load w/o operator 600 lbs

    Operating Load w/ operator 800 lbs

    Tipping Load w/o operator 900 lbs

    Tipping Load w/ operator 1200 lbs

    Tire Type Track

    Track Size 180x72x36

    Flow Rate 12.8 gpm (gallon per minute)

    Quick Attach Yes

    Engine Honda GX690 or Briggs and Stratton Vanguard 23HP

    Direct Drive Yes

  • Powertrain items consist of the engine, both drive motors, hydraulic pump, swing motor, and central pivot valve body. Warranty does not cover wear items such as lines, cylinders, tracks, pins, blades, seat, undercarriage, etc.